Grab Bars

SORT BY

  • LOW - HIGH
  • HIGH - LOW
  • A - Z
  • Z - A
Bradley 1-1/2"OD x 18" Grab Bar - Satin

$16.38

image

Product Materials

  • FLANGES: 31⁄8” dia. 13 gauge stainless steel.
  • ESCUTCHEONS: 22 gauge stainless steel. One-piece drawn construction with exposed surfaces in architectural satin finish. Snap over flanges to conceal mounting screws.
  • TUBING: 1½” O.D. 18 gauge stainless steel, seamless construction with exposed surfaces in architectural satin finish. Bent ends of tubing pass thru the flanges and are welded for maximum strength. Intermediate supports are contour cut and joined by welding to form an integral part of the grab bar. All exposed welds ground and polished to blend. Mandrel bending process maintains uniform bar diameter. Return provides 1½” standard safety clearance between wall and bar.

Strength
When properly mounted, all Bradley heavy duty grab bar systems meet or exceed the requirements of ANSI Standard A117.1, the ADA and ABA Accessibility Guidelines for Buildings and Facilities (ADAAG), and the Uniform Federal Accessibility Standard (UFAS).
Installation
Verify all rough-in dimensions prior to installation. Secure to wall where adequate in-wall backing exists. Use bar as template to locate mounting holes. Drill holes and set anchors as appropriate. Mount grab bar and secure mounting screws. Snap escutcheons into place.
Guide Specification
Grab bar shall be fabricated of satin finish stainless steel with concealed mounting flanges in sizes and con fi g u ra tions as indicated. Install with Bradley Mounting Kits as indicated.

hidden field